Device Description - Weber mt CR 5 Operating And Maintenance Manual

Device description

The CR 5 compactor is used for road building and landscaping compaction tasks.
Propulsion
The compactor is propelled by an air-cooled Hatz diesel engine.
Force is transferred to the exciter mechanically via a V-belt.
Operation
Start the Hatz diesel engine with the attached reversing starter.
After starting, vibration is switched on via the centrifugal clutch attached to the engine. Use the
gas lever to vary the engine rpm between idle and full throttle.
Forward and reverse is steplessly controlled via the handle attached to the manual guidance rod.
CR5 9