Maintenance Overview - Weber mt CR 5 Operating And Maintenance Manual

Maintenance overview

Maintenance interval
After the first 25
operating hours
Every 8 operating
hours/daily
Every 150 operating
hours/every 6 months
Every 150 operating
hours/every year
Every 250 operating
hours
In addition to the aforementioned maintenance work, the engine manufacturer's regulations must
be complied with.
Work must be carried out using regulation tools and the operating and maintenance manual must
be complied with for all work.
All maintenance work: select a collection vessel that is large enough to prevent oil from spilling onto
the ground. Dispose of waste oil in an environmentally friendly manner (regulation on waste oils).
Dispose of oils, oil-soaked cloths, and parts replaced and smeared with oil in an environmentally
friendly manner.
If lubricating oils and fuel come into contact with skin, they can cause skin cancer. Upon contact
with the skin, clean affected skin with suitable cleaning agent without delay.
If accessible during maintenance, check the condition and stability of all screws.
CR5
Maintenance
point
- Change engine oil
Engine -
-
Air filter -
Engine - Change engine oil
- Change the fuel filter
- Change oil filter
Transmission - Change oil
Exciter - Change oil
Engine -
Maintenance activity
Check valve clearance,
adjust if necessary
Re-tighten all accessible
threaded connections
Clean air filter insert,
check for damage,
replace if necessary
Check valve clearance,
adjust if necessary
15