Table of Contents
Advertisement
Menu Operation
SYSTEM Setting
1.
Select the [SYSTEM] menu.
2.
Press [SET] button and the [SYSTEM] menu appears.
3.
Use [UP] or [DOWN] button to select the option.
•
FACTORY RESET: To reset the camera setting
to factory setting, select the [FACTORY RESET]
option.
•
COMMUNICATION
>
CAMERA ID: You can use the camera
identification [CAMERA ID] to assign a
number to the camera. Use [LEFT] or [RIGHT]
to select a CAMERA ID.
>
PROTOCOL: Select a protocol for RS-485
communication.
>
BAUD RATE: Set the speed of communication
between the camera and the RS-485 unit.
>
SAVE & REBOOT: To confirm the
communication settings.
4.
Press [SET] button to confirm your selection.
Notes:
•
You need to set up [SAVE & REBOOT] for save [CAMERA
ID], [PROTOCOL], [BAUD & RATE] changes.
•
The menu screen is move to top menu, after set up
[FACTORY RESET].
37
Advertisement
Table of Contents
