Table of Contents
Advertisement
Connections
Flange-back Adjustment
The adjustment is required only when a lens without
focus-adjusting mechanism is mounted, or when a lens
with adjusting mechanism is mounted and focus that is
more accurate is needed.
1.
Loosen the flange-back fixing lever.
2.
Up and down the flange-back adjusting lever to
obtain a focused point while watching the monitor
screen.
3.
Tighten the flange-back fixing lever.
Note:
The object may be out of focus when using a source of
near-infrared light than using the visible light.
18
Advertisement
Table of Contents
