Advertisement
PC CONFIGURATOR
The following parameter items can be configured with PC Configurator Software (model: R8CFG).
Refer to the users manual of the software for detailed operations.
■ CHANNEL INDIVIDUAL SETTING
PARAMETER
Input Range
Lower range value
Upper range value
Fine zero adjustment
Fine gain adjustment
Scaled range Zero
Scaled range Span
■ CHANNEL BATCH SETTING
PARAMETER
Loss of internal bus communication detection time
Input moving average
Configuration mode
Note: Turn SW2-8 ON to allow programming by the PC Configurator via the Power/Network Module.
TERMINAL CONNECTIONS
Connect the unit as in the diagram below.
■ EXTERNAL DIMENSIONS unit: mm (inch)
SETTING RANGE
-20 to +20 (mA DC)
-20.00 to +20.00 (mA)
-20.00 to +20.00 (mA)
-320.00 to +320.00 (%)
-3.2000 to +3.2000
-32000 to +32000
-32000 to +32000
SETTING RANGE
0.0 to 99.9 (sec.)
Disable / Enable (8 times)
DIP switch (OFF),
PC (ON)
[3 (.12)]
24 (.94)
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
DEFAULT SETTING
-20 to +20 (mA DC)
4.00 (mA)
20.00 (mA)
0.00 (%)
1.0000
0
10000
DEFAULT SETTING
1.0 (sec.)
Disable
DIP switch (OFF)
72 (2.83)
[4 (.16)]
55 (2.17)
DIN RAIL
(35 mm wide)
R8-SVT8
EM-9668 P. 4 / 5
Advertisement
