Inlet tube A1
Inlet tube A2
Inlet tube B1
Inlet tube B2
Inlet tube AS1
Inlet tube AS2
Inlet tube W
WP tube
Drain tube P
Appended Fig. 1-22 Tubing Diagram of ChromasterUltra R
Inlet tube A1
Inlet tube A2
Inlet tube B1
Inlet tube B2
Inlet tube AS1
Inlet tube AS2
Inlet tube W
WP tube
Drain tube P
Flexible tube 180
Flexible tube 300
Flexible tube 400
INLET semi-micro assy
OUTLET tube assy
(5)
ChromasterUltra R
(DAD or UV-VIS detector + FL detector)
The FL detector is connected to a DAD (or UV-VIS
detector) in parallel.
Flexible tube 300
(DAD or UV-VIS detector + FL detector)
A FL detector is installed on the right side of a column oven.
Connect the inlet tube of FL detector to the outlet side of column
in the column oven.
(Standard accessory P/N 622-2011 FINGERTIGHT is used for
set screws and ferrules.)
Appended Table 1-8 Tubes to be Used
APPENDIX 1 - 27
Two Detectors System
S
Flexible tube 400
Flexible tube 180
P/N 889-0320 (accessory)
P/N 889-0321 (accessory)
P/N 889-0322 (accessory)
P/N 889-0323 (accessory)
P/N 889-0324 (accessory)
P/N 889-0325 (accessory))
P/N 889-0326 (accessory)
P/N 889-0341 (accessory)
P/N 889-0340 (accessory)
P/N 889-0344 (accessory)
P/N 889-0342 (accessory)
P/N 889-0343 (accessory)
P/N 891-2920 (attached to FL
detector)
P/N 890-2684 (attached to
6440 FL detector)
INLET semi-micro U assy
Flexible tube 400
OUTLET tube assy
Two Detectors System
S