Maintenance; Operation - S&P TL-10N User Instructions

– WARNING: Do not use this heater
in rooms that are occupied by per-
sons who cannot leave the room
by themselves, unless permanent
surveillance is provided.
– WARNING: To reduce the risk of
fi re, keep textiles, curtains, or
other fl ammable material at least
1m away from the air outlet.
Power selection knob
Stop
Low Power Heating- 1.000 W
High Power Heating - 2.000 W
Thermostat knob
Maximum position of the thermostat
Minimum position of the thermostat
The thermostat controls the heater to
maintain the temperature selected bet-
ween minimum and maximum . When
selected room temperature is obtained
the thermostat will switch heater off,
and on, to maintain this setting.

Operation

1. Please ensure that the supply
voltage is in accordance with the
product rating plate (230 V 50 Hz).

Maintenance

Remark: it is very important that
regular maintenance of the fan
heater is carried out in order to reduce
the risk of possible fire hazards.
Overheating, switch off
6
qualified