What To Do In Case Of Malfunctions; Maintenance - S&P EMIDUAL Installation Manual

Using the remote (optional)
The optional remote control allows to set a "comfort" or "eco" temperature for
each hour of the day, all days independently.
Operating mode could be easily switched from the remote to the pilot wire and
vice-versa.
With just one remote it is possible to transmit the same program to all the pro-
ducts of this series you have installed. All details about programming are inclu-
ded in the instruction manual of the remote control.

7. What to do in case of malfunctions

In the event of overheating, the safety device on the appliance automatically disa-
bles the heating elements.
The product will resume automatic operation as soon as the temperature returns
below the safety limit.
Attention: the functioning led will not be switched off by the operation of the
safety device.
i If you notice irregular operation, damage to the heating panel or to the structu-
re of the appliance, disconnect the product from the mains power supply and
contact your technical assistance centre or dealer.

8. Maintenance

This product does not require any special maintenance.
Clean the product, especially the heating panel, with a dry cloth once every 6
months.
If the product requires repairing, contact an authorised technical service centre.
When replacing the power cable, use a 2x1.00mm2 or 3x1.00mm2 H05VV-F HAR
type, depending on the version. This operation, for cables both with and without
plugs, must be performed by qualified personnel and never by the end user in
order to avoid damaging the appliance and jeopardising personal safety.
16