Switching Off The Mowing Deck; Setting The Mowing Height - SNT SPIDER AUTONOMOUS 2.0 Operation Manual

10.6 SWITCHING OFF THE MOWING DECK

68
Switch the mowing deck switch to the off position [ 16 ]. If you no longer mow,
set the maximum height of the mowing deck with the control [ 17 ] on the RC.
16 17

10.7 SETTING THE MOWING HEIGHT

The machine has infinitely variable mowing height adjustment. The mowing height
can be adjusted as standard between 90 and 140 mm. The mowing height is
adjusted via the [ 17 ] switch on the RC. Refer to the markings on the machine
body for guidance.
For tall or wet vegetation, select a higher cutting position.
The lowest position is used when mowing flat and maintained areas.
When mowing unknown areas for the first time,
we recommend mowing the area to higher setting and
then re-inspecting the area for unwanted items.
It is recommended that further mowing be carried out
after the mowed grass has dried up.
Set the mowing height on the machine as a guide, cut a few meters and check
if the stubble height complies with your requirements.
The height of the stubble on a slope can vary
considerably from the height of stubble on flat ground.
The switch [ 17 ] has 3 positions: minimum
and maximum position and a middle position that
maintains the currently set mowing height.
69