Recommended Working Procedures - SNT SPIDER AUTONOMOUS 2.0 Operation Manual

5.1 SERVICE POSITION
32
The service position is a special machine position (see picture below) that
allows the operator to maintain the mowing deck. Always tilt the machine
towards the fuel tank to prevent oil leakage into the air filter. The direction of
tilt and machine position is indicated by the SERVICE POSITION safety symbol
(arrow pointing to the side with the fuel tank).
Before carrying out maintenance, it is the operator's
responsibility to secure the machine against falling.
5.2

RECOMMENDED WORKING PROCEDURES

These pictograms provide basic information about working with the machine
in different terrain conditions with three different modes of machine operation.
It is always the operator's responsibility to choose the most suitable working
method, especially with regard to safety. In any case, it is always necessary to
follow the safety instructions and other instructions given in this user manual.
These pictograms are located on the top cover of the machine.
INITIAL CHECK
CHECK OIL CHECK TIRE
BENZIN
LEVEL GASOLINE PRESSURE
NATURAL
95
RC MOWING GPS DEFINED ROUTE
WWW START JOB
TURN OFF
spidernewtech.com
TURN ON
TAP RTK UFON
GPS
GPS PERIMETER MOWING
33