Assembly - Pro-Form PFEVEX79911.0 User Manual

ASSEMBLY

•• Assembly requires two persons.
•• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
•• To identify small parts, see page 5.
1. Orient the Front Stabilizer (22) as shown.
While a second person lifts the front of the Base
(1), attach the Front Stabilizer (22) to the Base
with two 3/8" x 2 1/4" Screws (74).
•• In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one adjustable wrench
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1
74
22
6
1