Table of Contents
Advertisement
Installer manual Fleck 2750 NXT/NXT2 - Maintenance
9.4.6
Micro-switches replacement
Info
This procedure is valid for AC and DC motor assemblies.
1. Using a flat screwdriver, unscrew (2) and open the cover (1).
2. Open the controller (3).
3. Disconnect the microswitches (4).
4. Using a Phillips screwdriver, unscrew (5).
5. Remove and change the microswitches (4).
6. Reverse above procedure steps to rebuild.
Ref. MKT-IM-026 / C - 15.12.2020
145 / 170
Advertisement
Table of Contents
