Retrieving The Machine - Toro Maxi Sneaker 370 Operator's Manual

Retrieving the Machine

Under normal conditions, do not tow the machine. If the machine becomes disabled and
retrieval is needed:
• Do not tow the machine for more than 180 m (200 yd).
• Tow the machine at less than 1.5–3.0 km/h (1–2 mph).
• You cannot steer the machine as it is towed.
• Use a maximum towing force of 1.5 times the machine weight.
1. Engage parking brake.
2. Block front and rear tires.
3. Drive the towing vehicle to the front of the machine.
4. Attach the machine to the towing vehicle using the tie down points.
5. Ensure that all controls are in N
6. Open the bypass valve.
7. Move the driving control in the direction of
travel.
8. Disengage the parking brake.
9. After towing:
A. Move the controls to N
B. Engage the parking brake.
C. Block the wheels.
D. Disconnect the machine from the towing
vehicle.
E. Turn bypass valve to original position.
3455-524A
.
EUTRAL
.
EUTRAL
Page 6–5
G416164
Transport: Retrieving the Machine