Checking The Seat Belt; Cleaning; Removing Debris - Toro Maxi Sneaker 370 Operator's Manual

Checking the Roll Bar (continued)
2. Inspect the roll bar for cracks, rust, or holes in the roll bar component parts.
Note:
have any doubts about the ROPS system, contact an Authorized Service Dealer.

Checking the Seat Belt

1. Check the seat belt
replace any damaged parts.
2. Ensure that the mounting bolts
belts are tight. Torque the bolts to 104–115
N•m (77–85 ft•lb).
3. Keep the seat belts clean using only soap and
water.

Cleaning

Removing Debris

1. Turn the battery disconnect to O
2. Wipe away debris from the air cleaner.
3. Clean any debris buildup on the engine and in the transmission with a brush or blower.
4. Ensure that all mud and debris is rinsed from the tires before parking the machine
overnight.
Do not spray water onto the operator console or the electrical center in the engine
compartment. Water can damage electrical components. Wipe them down instead.
Keep pressurized water away from the ECU connections.
Maintenance: ROPS Maintenance
Age, weather, and accidents cause damage to the roll bar and ROPS parts. If you
for damage and
for the seat
G416165
.
FF
IMPORTANT
Page 7–23 3455-524 A