Chapter 3: Preparation; Jobsite Preparation; Reviewing The Job Plan; Selecting The Start And End Points - Toro Maxi Sneaker 370 Operator's Manual

Jobsite Preparation

A successful job begins before working. The first step in planning is reviewing information
already available about the job and jobsite.

Reviewing the Job Plan

Review the blueprints or other plans. Check for information about existing or planned
structures, elevations, or proposed work that may be taking place at the same time.

Selecting the Start and End Points

Select an end to use as a starting point. Consider the following when selecting a starting
point:
• Always park the equipment on a level site. Consider how the slope will affect setup
and operation. Assess the risks on each slope to determine if factors affecting risks
create an unsafe condition for working.
• Check that the starting and ending points allow enough space for working.
• Consider how shade, wind, fumes, and other site features will affect operator
comfort.
3455-524 A Page 3–1
Chapter 3
Preparation
Preparation