Checking the Engine Oil
1. While the oil is warm, check the level at the
dipstick
2. Add oil at the fill point
the level at the highest line on the dipstick.
Changing the Engine Oil
1. While the oil is warm, remove the plug
drain.
2. Install the drain plug.
3. Replace the filter
oil.
4. Add oil at the fill point
5. Start the engine to circulate the oil.
6. Check the oil level.
Checking the Exhaust Clamp
Check the clamp and lock screw on the exhaust extension to ensure that it is tight.
Checking the Exhaust System
Check for any loose or damaged components. Check the heat shields near the battery,
starter, and air cleaner and replace them if they are damaged.
3455-524A
.
as needed to keep
each time you change the
.
G418843
to
G4088569
Page 7–6
Maintenance: Engine Maintenance