Install The Stabs; Install The Vertical Fin - BVM Go Fly Gold Renegade Assembly & Operation Manual

Install the Stabs

Push the Carbon rods through the fuselage.
Then connect your servo connection and
secure with your favorite method.
BVM use our Black Tape for this.
BVM Part # V-PNP-SP087
The Stab is secured by a single bolt
through the fuse into the Carbon tab. You
will need a 2 mm driver for this step. You
can use BVM # PS-TO-0014 for this step.

Install the vertical fin

Connect the LED lead and secure with
your favorite method.
Insert the Carbon Rods into the
receptacles.
BVM ® 2023
RENEGADE
Assembly & Operation Manual
5 2/2023