Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for real living SEVEN HILLS BUCKET OFFICE CHAIR HG-1371-3 Grey
Summary of Contents for real living SEVEN HILLS BUCKET OFFICE CHAIR HG-1371-3 Grey
-
Page 2: Maintenance
GENERAL BEST PRACTICES FOR ASSEMBLY: Read all instructions before starting. Separate all parts before starting. Clear a flat covered space to assemble. If parts are missing, broken, damaged or worn, stop using the product until all repairs are made. Always keep children under close supervision while they are using or around this product. Never leave children unattended. -
Page 3: Parts List
PARTS LIST Castor Base Gas Lift Telescopic Cover Seat Plate Back Cushion Seat Cushion HARDWARE LIST M6x25mm Screw Allen Wrench M6x20mm Screw... -
Page 4: Helpful Hints
HELPFUL HINTS NOTE: To avoid damage, ensure screws are hand tightened. DO NOT USE 1 person POWER TOOLS TO ASSEMBLE YOUR UNIT. - Page 5 STEP 1 Place the base (B) upside down on the ground. Insert the five castors (A) into the base as shown in the diagram, make sure all castors are firmly inserted.
- Page 6 STEP 2 Turn the base (B) right side up, insert gas lift (C) as shown in the diagram, and place telescopic cover (D) over the gas lift (C).
- Page 7 STEP 3 Attach the back cushion (F) to the base of the seat cushion (G) with screws (1) using allen wrench (3) as shown in the diagram. Do not full tighten the screws until all screws are in place.
- Page 8 STEP 4 Attach the seat plate (E) to the base of the seat cushion (G) with screws (2) using allen wrench (3) as shown in the diagram. Do not full tighten the screws until all screws are in place.
- Page 9 STEP 5 Carefully lower the seat plate (E) onto the gas lift (C) as shown in the diagram. The assembly is complete, ensure all screws are tightened before use.
Need help?
Do you have a question about the SEVEN HILLS BUCKET OFFICE CHAIR HG-1371-3 Grey and is the answer not in the manual?
Questions and answers