real living HG-4288 Assembly Instruction

Farmhouse grey fabric office chair

Assemble on soft surfaces to prevent damage to the product finish.

DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.

Check bolts/screws periodically and tighten if necessary.

WARNING: Should this product become damaged, and/or components are broken or

For spare hardware, please contact Big Lots Customer Care

Tel:1-866-244-5687

Assembly Instruction

Item No. :HG-4288

SKU No. :810465634

Description:Farmhouse Grey Fabric Office Chair

WARNING

Caution: Adult assembly required.

DO NOT use power tools.

CARE AND CLEANING

Clean with dry cloth thoroughly.

MAINTENANCE

missing, DO NOT USE.

Page 1 of 5

E-Mail:talk2us@biglots.com

Table of Contents

Need help?

Do you have a question about the HG-4288 and is the answer not in the manual?

Page 1 Assembly Instruction Item No. :HG-4288 SKU No. :810465634 Description:Farmhouse Grey Fabric Office Chair WARNING Caution: Adult assembly required. Assemble on soft surfaces to prevent damage to the product finish. DO NOT use power tools. CARE AND CLEANING DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.
Page 2 Tools Required (Included) Allen key Hardware included 8PCS 2PCS The above diagram is a guide to help you to identify the different parts of the unit when removing them from the packaging. Please follow the listed steps in order to complete the assembly process.
Page 3 STEP1 Insert part (1) into part (2) as shown in the diagram. STEP2 Turn part (2) onto the wheels. Insert part (3) into the center hole as shown in the diagram. Page 3 of 5...
Page 4 STEP3 Align the holes in part (4) with the holes in part (5). Using screws (A) and Allen Key, attach part (4) to part (5) as shown in the diagram. Fully tighten all screws. STEP4 Align the holes in part (6) with the holes in part (5).
Page 5 STEP5 Align the holes in part (7) with the holes in part (6). Using screws (B) and Allen Key, attach part (7) to part (6) as shown in the diagram. Fully tighten all screws. STEP6 Align the center hole of part (4) with the top of part (3) and press firmly into place.

810465634