Summary of Contents for real living LAKEWOOD GBO23-914ST
Page 1
LAKEWOOD ALL WEATHER WICKER UMBRELLA SIDE TABLE ASSEMBLY INSTRUCTIONS ITEM# : GBO23-914ST SKU# : 810580417 Need help? We are here for you! 1-888-733-8169 Toll Free Or email us at customerservice_01@yeah.net,customerservice_02@yeah.net customerservice_03@yeah.net...
Page 2
GENERAL BEST PRACTICES FOR ASSEMBLY: Read all instructions before starting Clear a flat covered space to begin assembly Always best to do it with a friend Note that hardware required is provided for every step Pay attention to orientation Number of the hardware corresponds to its letter in the package Helpful hints provided along the way WARNINGS: To avoid hazards caused to the product or people around it, make sure to have weights applied to the base...
Page 3
PARTS LIST 1PC Table Top 2PC Leg Panel 2PC Side Panel 1PC Umbrella Pole 1PC Steel Hoop Plate HARDWARE LIST 16PC Washer 8PC Screw(φ6x16mm) 8PC Screw(φ6x30mm) 1PC Allen Wrench 2PC Regulating Screw(φ6x20mm)
Page 4
STEP 1 Secure 1 steel hoop plate (D) to 2 leg panel (B) by using 2 screws (G) and 2 washers (F) with allen wrench (J). Do not fully tighten all screws now. STEP 2 Secure 2 side panels (C) to steel hoop plate (D) by using 2 screws (G) and 2 washers (F) with allen wrench (J).
Page 5
STEP 3 Secure 2 leg panel (B) to 2 side panels (C) by using 8 screws (H) and 8 washers (F) with allen wrench (J). Do not fully tighten all screws now. STEP 4 Secure 1 umbrella pole (E) to 1 steel hoop plate (D) by using 4 screws (G) and 4 washers (F) with allen wrench (J) to fully tightened.
Page 6
STEP 5 Turn over the assembled table frame, place the table top (A) on it. Secure table top (A) to 2 leg panels (B) by using 2 regulating screws (K). STEP 6 Verify the alignment and adjustment, fully tighten all screws.
Need help?
Do you have a question about the LAKEWOOD GBO23-914ST and is the answer not in the manual?
Questions and answers