GENERAL BEST PRACTICES FOR ASSEMBLY: Read all instructions before starting Clear a flat covered space to assemble We recommend two people for assembly. Note that hardware required is provided for every step Pay attention to orientation Letter of the part corresponds to a sticker on the product Number of the hardware corresponds to its number in the package Helpful hints provided along the way WARNING:...
Page 5
STEP 1 Insert the part (A) into part (B ) as shown. STEP 2 Insert part (C) into the center hole of part (B) as shown in the diagram.
Page 6
STEP 3 Align the holes in part (D) with the holes in part (F). Using screws (1) and Allen Wrench (4), attach part (F) to part (D) as shown in the diagram. Fully tighten all screws.
Page 7
STEP 4 Align the holes in part (G) with the holes in part (E). Using screws (3) and Allen Wrench (4), attach part (G) to part (E) as shown in the diagram. Fully tighten all screws.
Page 8
STEP 5 Align the holes in part (G) with the holes in part (D). Using screws (2) and Allen Wrench (4), attach part (G) to part (D) as shown in the diagram. Fully tighten all screws.
Page 9
STEP 6 Align the center hole of part (F) with the top of part (C) and press firmly into place. Assembly is now complete. Use the lever to raise and lower the seat as desired.