Zenith 802006NZ User Manual page 3

The safety lock feature is provided to prevent boiling water flowing if the hot
lever is inadvertently operated.
This function can be activated and deactivated from either the Tap or from the
touch screen display (Located on the unit in the cupboard).
To set the tap safety setting:
All-In-One taps)
Press [MENU] button for main
1.
menu.
Press [Setting] button.
2.
Press [Safety] button.
3.
Press button A
4.
to allow or disallow the safety
setting to be changed on the
tap.
Note: The Factory setting is set at YES
To activate the safety
for Classic, Elite & AIO)
(From the tap):
After selecting to allow the safety setting
from the menu screen. Place a finger on
the safety lock, then depress the Classic
Blue/Chilled lever or touch the Elite Blue/
Chilled Button, while keeping both fingers
in position for more than ten seconds.
The Classic safety lock indicator light will
now be illuminated or the Elite lights will
flash, momentarily.
To deactivate the safety
(From the tap):
First place a finger on the safety lock,
then depress the Classic Blue/Chilled lever
or touch the Elite Blue/Chilled Button, while
keeping both fingers in position for more than
ten seconds. The Classic safety lock indicator
light will now extinguish or the Elite lights will
flash, momentarily.
To control the safety
(From the touch screen):
(See page 25)
For Hot Isolation:
Not for HydroTap Arc/Cube, (see page 25)
802006NZ - HT-BCS;BCSH A-AV User Manual - May 2016- v3.00
3. Tap Safety
YES / NO
(Classic; Elite &
HydroTap Classic
Safety Lock
Elite Tap
Page 3 of 32
A
B
C