Zenith 802006NZ User Manual page 28

Filter Maintenance
Air Inlet Filter
The Zenith HydroTap air filter is conveniently located on the outside of the
condenser. The filter screen is a sliding fit in the plastic housing on the side
of the under sink unit. The screen may be removed for cleaning, by sliding it
forward. This needs to be inspected at least quarterly, cleaned and replaced
if damaged.
For best performance the unit should only be operated with a clean
Note:
air filter screen, correctly fitted in place. Maintain, at least, a 50mm air gap
in front of the screen at all times. Take care not to allow cloths or other soft
materials to accidentally block the air inlet.
Page 28 of 32 802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00