Zenith 802006NZ User Manual page 21

Table of Contents

Advertisement

Set Date / Time
G4 HydroTap Set
Date/Time Screen
Set Temperature
Zenith HydroTaps are designed to operate within 1ºC to 2ºC of set point for
boiling water and between 3ºC to 5ºC for chilled drinking water. All boiling
water units are self calibrating to 98ºC, which is the recommended setting.
Adjustments to the 98ºC setting are not recommended, however, under
certain circumstances adjustments may be made between 68º - 100ºC. It
should be noted that a 6% energy saving in standby power can be achieved
when the 98ºC setting is selected over the 100ºC setting. Furthermore, the
100ºC setting is not recommended as the delivery rate of water may be
affected.
802006NZ - HT-BCS;BCSH A-AV User Manual - May 2016- v3.00
1. Press the [MENU] button for main
menu.
2. Press the [Setting] button.
3. Press the [Date/Time] button.
4. Choose 12 hour mode or 24 hour
mode by pressing the square
button. The selected mode will be
displayed in dark grey colour with a
tick box on the right.
5. Press [NEXT] button to set time.
Select individually the hour, minutes
1.
and day and adjust using the up
and down arrows.
Select individually the date, month
2.
and year and adjust using the up
and down arrows.
Press [HOME] to return to the
3.
Home screen.
1. Press the [Settings] button in the
main menu.
2. Press the [Temperature] button.
3. To adjust the temperature, press
the relevant temperature button and
then use the up and down arrows.
Page 21 of 32

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hydrotap g4

Table of Contents