Zenith 802006NZ User Manual page 24

LCD Screen operation - Section G
Note: Any attempt, during OFF mode, to dispense water, will bring the unit
out of sleep mode. The unit will return to sleep mode after 2 hours of non
use. Please allow sufficient time for the water to reach the set temperature
after disabling the sleep mode.
In ON / OFF Mode the user may turn the unit ON or OFF at specific times
for individual days or alternatively by weekly and/or weekend settings.
To activate ON/OFF mode:
Press the [MENU] button for main
1.
menu.
Press the [Setting] button.
2.
If required, Enter your 4 digit
3.
password
Press the [Energy Modes] button.
4.
Select 'Individual set' if you wish to
5.
allocate a specific time for each day.
Select 'group set 1' if you wish to allocate the same time to all 7 days
6.
Select 'Group set 2' if you wish to allocate the same time to the 5 working
7.
days (Mon-Fri) and additional times for (Sat-Sun).
Individual days set screen
This screen allows you to select the
individual days for programming.
Only one ON /OFF period is allowed
for each day.
Group set screen
Press Group 1 or Group 2 option
1.
Press button and then scroll
A
2.
Up or Down to enable / disable the
group set. When the enable box is
ticked, this allows each individual
day to have an "On/Off " time.
Press [ON/OFF Modes] button, to
3.
set up ON/OFF time.
When in Group 2 Press [NEXT] to
4.
select Sat-Sun options
Note: Any attempt, during OFF mode, to dispense water, will bring the unit
out of energy mode. The system will revert to the energy mode setting after
30 minutes of non use.
Page 24 of 32 802006NZ - HT-BCS; BCSH A-AV User Manual - May 2016 - v3.00
A