Zenith 802006NZ User Manual page 15

Table of Contents

Advertisement

LCD Screen operation - Section B
LCD Screen operation - Section C
C
Install
Once your Zenith HydroTap G4 unit has been installed, Go to Install menu to
configure the system settings for your product.
1. - Filter Flush
Have a 10L bucket or similar container (not supplied) at the ready to hold
a quantity of water that will be ejected while the Filter Flush Mode is in
operation. Open the filter access door on the front of the HydroTap and the
filter cartridge will be exposed. Located to the rear RHS of the cartridge is a
flush line, approx 600mm long and the flush line stop cock. Place the valve
end of the flush line into the 10L bucket or container.
Run at least 10 Ltrs of
Note:
water through to flush the filter
of any excess black carbon
particles (this is normal). Once
the filter flush has finished,
press the Stop button to display
the main menu
802006NZ - HT-BCS;BCSH A-AV User Manual - May 2016- v3.00
Press [Energy] to view Energy
1.
information.
The Total energy consumption will
2.
be displayed, or
Select reset to view the energy
3.
used for that period.
Press [<=] for the previous menu
4.
or press [Home] to return to the
home screen.
Sub menu:
1 - Filter Flush
2 - Filter Reset
3 - Boiling Calibration
4 - Booster
5 - CO
Purge
2
6 - Lux Sensor Calibration
7 - Advanced options
8 - Reset
Press the [MENU] button for main
1.
menu.
Press the [Install] button. Turn the
2.
stop cock ON.
Press the [Filter Flush] button.
3.
Press [Start] button to start filter
4.
flush. Once the filter flush is
finished, Turn the stop cock OFF
first (to ensure the cock is properly
closed) then press [Stop] to end
filter flush mode.
Press [<=] button for the previous
5.
menu or press [Home] button to
return to the home screen.
After initial installation, Turning
6.
OFF the Filter Flush Mode puts the
HydroTap into calibration mode.
With subsequent filter changes, the
system reverts to the main menu.
Page 15 of 32

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hydrotap g4

Table of Contents