Zenith 802006NZ User Manual page 19

LCD Screen operation - Section D
D Service
This section is reserved for service technicians only
: In Australia call a licensed electrician, plumber,or Zenith office on
Note
1800-638-633, for assistance, service, spare parts, or enquiries.
LCD Screen operation - Section E
3.
E Security
The Zenith HydroTap G4 allows the appliance coordinator to set up a pass-
word to protect against users changing the preferred system settings. When
activated, the password will be necessary to access the Settings and Comms
areas.
802006NZ - HT-BCS;BCSH A-AV User Manual - May 2016- v3.00
To set a password
Press the [MENU] button for main
1.
menu.
Press the [Security] button.
2.
Press [Enable Password}
3.
Enter a 4 digit password
4.
To change a password
Press the [MENU] button for main
1.
menu.
Press the [Security] button.
2.
Press [Change Password}
3.
Enter your old 4 digit password
4.
Then enter your new 4 digit
5.
password. You will need to enter
your password to access the
settings and communications
screens. If you have forgotten the
password, please disconnect the
power and restart your HydroTap
unit by pressing the[Reset] button.
Page 19 of 32