Table of Contents
Advertisement
Working on the Device
5.6 SDHC Memory Card
(1)
Push the holder, push the sealing cap to the back and remove it
(2)
Unlock the eject lever
(3)
Remove the SDHC memory card
Unpack the new SDHC memory card.
²
Do not touch the contacts of the SDHC memory card with your fingers.
Insert the new SDHC memory card.
²
When inserting, make sure that the SDHC memory card is properly aligned: The side with the contacts
must be facing up, the side with the sticker facing down.
[dw_insert_SDHC, 1, --_--]
Figure 5-21
!
CAUTION
Exercise caution when removing the SDHC memory card from a defective device.
If you want to remove the SDHC memory card from a defective device and to insert the card into another
healthy device and if the data must be kept, note the following:
Noncompliance with the specified measures can result in loss of data.
To avoid a reformatting of the SDHC memory card, you must first import the parameters of the defec-
²
tive device to another device.
You can insert the SDHC memory card in the other device and use it only then.
²
The recordings on the SDHC memory card from the defective device can still be read in the other
²
device.
Insert the sealing cap back again.
²
Resume operation of the device.
²
210
Inserting the SDHC Memory Card into the Device
SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-J, Edition 08.2020
Advertisement
Table of Contents
