Siemens SIPROTEC 5 V8.30 Manual page 175

Figure
Connector type
Wavelength
Baud rate
Protocol
Max. line length
Transmitter Power
50 μm/125 μm, NA
62.5 μm/125 μm, NA
Receiver sensitivity
Optical budget
Interface design
Laser class 1 as per EN 60825-1/-2
The ETH-BD-2FO module offers the possibility of replacing the SFPs (Small Form-Factor Pluggable) delivered by
default for a communication route of up to 2 km by SFPs that can be ordered separately in order to adapt the
interface to different transmission media and longer routes.
SFP with Optical Interface for 24 km, Single Mode
Description
Product code
Connector type
Wavelength
Baud rate
Protocol
Max. line length
Distance 24 km
Laser class 1 as per EN 60825-1/-2
14 Numerical Aperture (NA = sin θ [launch angle])
SIPROTEC 5, Hardware Description, Manual
C53000-G5040-C002-J, Edition 08.2020
2 x duplex LC
λ = 1300 nm
100 Mbit/s
DIGSI 5 protocol (secure Web service protocol)
IEC 61850 (MMS and GOOSE)
IEC 61850-8-1 (9-2 Client and 9-2 Merging Unit)
IEC 60870-5-104
PROFINET IO
Synchrophasor protocol (IEEE C37.118 – PMU)
You can switch other network services such as HSR, SNMP, RSTP, PRP,
SNTP, and IEEE 1588v2/PTP on and off.
2 km for 62.5 µm/125 µm optical fibers
Minimum
-24.0 dBm
14
= 0.2
-20.0 dBm
14 = 0.275
Maximum -12.0 dBm
Minimum -31.0 dBm
Minimum 7.0 dB for 50 μm/125 μm, NA
Minimum 11.0 dB for 62.5 μm/125 μm, NA
Corresponds to IEEE 802.3, 100Base-FX
With the use of 62.5 μm/125 μm and 50 μm/125 μm optical fibers
SFP for distances up to 24 km when using singlemode optical fibers
P1Z3210
Duplex LC
λ = 1300 nm
100 Mbit/s
See information for the module ETH-BD-2FO
24 km for 9 µm/125 µm optical fibers
With the use of 9 µm/125 µm optical fibers
4.2 Communication Modules
Typical Maximum
-21.0 dBm -17.0 dBm
-17.0 dBm -14.0 dBm
14 = 0.2
14 = 0.275
Plug-In Modules
175