Network Bullet Camera·Quick Start Guide
Junction Box
Drill Template
Safety Rope
Figure 2-8 Installation with a Junction Box
2.4 Mounting with a Gang Box
Before You Start:
An adapter plate should be purchased separately if you mount the
camera to a gang box.
Steps:
1. Install the adapter plate to the gang box.
2. Route the cables.
3. Fix the camera to the adapter plate with screws.
4. Adjust the surveillance angle according to step 3 in Section 2.2.
5. Install the water-proof jacket according to Section 2.5.
19
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com