Mounting With A Gang Box - HIKVISION IPC-B220-IZ Quick Start Manual

Network Bullet Camera·Quick Start Guide
6. Route the cables of the camera. Connect the cables and power on
the camera to see if you can get an image on your monitoring
screen.
Note:
If you can't get the image, check the power and network
connection before performing the next step.
7. Secure the camera to the junction box with the screws.
8. Adjust the view angle. Refer to Step 6 in Section 2.2.1 Direct
Mounting.
9. Adjust zoom and focus (refer to Section 2.3 Zoom and Focus
Adjustment).

2.2.3 Mounting with a Gang Box

Before you start:
The gang box is not included in the package. You need to prepare
one for this mounting type.
Steps:
1. Secure the camera attachment to a gang box with the screws.
2. (Optional) Install the water-proof jacket for network interface.
Refer to Section2.4 Installation of Network Cable Water-proof
Jacket (Optional) for detailed installation procedures.
3. Route the cables of the camera.
4. Connect the cables and power on the camera to see if you can get
an image on your monitoring screen.
Note:
17