5. Insert the water-proof rubber gasket ⑤ into the waterproof
endcap ④, and secure lock nut ⑥ with the water-proof
endcap ④.
6. Align the snap on the water-proof endcap ④ with the notch on
the camera's network interface socket ①, and then secure the
water-proof endcap ④ to the camera's network interface
socket ① to finish installation.
Camera
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Network Bullet Camera·Quick Start Guide
Align the snap and notch.
Figure 2-11 Water-proof Accessory Installation
i. Insert
into
⑤
ii. Secure
with
⑥
Switch/Router
22
.
④
.
④