Before Using the Fax Machine > Part Names and Functions
Part Names and Functions
Machine
This chapter explains the names of parts when the machine is used as a fax machine. For the parts required when
functions other than FAX are used, refer to the following:
Machine's Operation Guide
1
1
Operation panel
2
Power switch
3
TEL connector
4
LINE connector
IMPORTANT
You cannot automatically receive a fax when the power switch is turned off.
2
Perform the fax operation with this panel.
Set this switch to the ON side when performing the fax or copier operation. The touch
panel lights to enable operation.
When using a commercially available telephone set, connect the modular cord to this
connector.
Connect the modular cord for the telephone line to this connector.
2-2
3
4