Printing Administrative Reports (Result Report Setting); Send Result Reports; Attached Image When A Network Fax Is Sent - Kyocera ECOSYS M3655idn Operation Manual

Managing Jobs > Printing Administrative Reports (Result Report Setting)

Printing Administrative Reports (Result Report Setting)

You can print various administrative reports to check the results of fax transmission or the status of the functional setup.

Send Result Reports

Each time you send a fax, you can print a report to confirm whether the fax was sent successfully. You can also print the
transmitted image in the send result report.
1
2

Attached image when a network fax is sent

Select whether the image to be attached to an Activity Report will be [Body] or [Cover Page], when using network fax.
1
2
Display the screen.
[System Menu/Counter] key > [Report] > [Result Report Setting] > [Send Result Report] >
[FAX]
Configure the function.
1
Select [Off] (not to print), [On] (to print), [Error Only], or [Specify Each Job].
NOTE
When [Specify Each Job] is selected, it is possible to set a send result report when
transmitting.
FAX TX Report (page 3-23)
2
If you selected [On], [Error Only] or [Specify Each Job], specify whether the transmitted
image is to be attached by selecting [Off] (do not print transmitted image), [Partial Image]
(print part of the transmitted image at full size), or [Full Image] (print the entire transmitted
image at reduced size).
With transmitted image
Send Result Report
Completed
Display the screen.
[System Menu/Counter] key > [Report] > [Result Report Setting] > [Send Result Report] >
[Attach Image of Network FAX]
Configure the settings.
Select [Body] or [Cover Page].
Without transmitted
7-4
Send Result Report
Completed