Kyocera ECOSYS M3655idn Operation Manual page 84

Using Convenient Fax Functions > Polling Communication
Using Polling Reception
1
2
3
4
Using Polling Reception with Sub Addresses
For polling reception, enter the sub address (on this machine, sub address and sub address password) set at the
sending machine. This communication is still possible when the other party is using a third-party machine provided it is
equipped with the same type of sub address communication function.
1
2
3
NOTE
When the other party is using sub addresses, refer to Using Polling Reception with Sub
Addresses below.
Select [FAX] on the Home screen.
Turn on polling reception.
[Functions] > [FAX Polling RX] > [On]
Specifying destination.
Methods For Entering the Destination (page 3-7)
Press the [Start] key.
The operations for reception begin.
NOTE
When On is selected in Dest. Check before Send, a destination confirmation screen is
displayed when you press the [Start] key.
Confirmation Screen of Destinations (page 7-10)
IMPORTANT
Check the sub address set by the sender beforehand.
Select [FAX] on the Home screen.
Turn on polling reception.
To turn on polling reception, refer to the following:
Polling Reception (page 5-17)
Select the destination, and entering the sub address.
For the procedure for setting a sub address, refer to the following:
Sub Address Transmission (page 5-14)
For the procedure for selecting a destination, refer to the following:
Methods For Entering the Destination (page 3-7)
NOTE
You can select destinations using a combination of numeric keys input, One Touch Key
selection and selection from the Address Book containing registered sub addresses.
5-18