Oracle X5-2 Installation Manual page 66

Linux operating systems

Hide thumbs Also See for X5-2:

Table of Contents

Install Oracle Linux 6.5, 6.6, or 7 Using PXE Network Boot

For UEFI Boot Mode, the following screen appears:

■

Note -

depending on the type of disk controller and other hardware, such as PCIe network cards,

installed in your server.

In the Please Select Boot Device menu, select the network port that is configured

to communicate with your PXE network install server, then press Enter.

The network bootloader loads and starts to execute.

From this point on, the installation procedure is site specific as determined by

the site KickStart file.

Oracle Server X5-2 Installation Guide for Linux Operating Systems • October 2016

The Please Select Boot Device menu that appears in your installation might differ

Table of Contents