Oracle X5-2 Installation Manual page 54

Install Oracle Linux 6.5 or 6.6 OS Manually Using Local or Remote Media
The server reboots and the BIOS screen appears.
25. To access the BIOS Setup Utility so that you can set the server to boot from the
operating system you just installed, press the F2 key.
A BIOS Setup Utility screen appears with the Boot Menu selected. The BIOS screen displayed
and the actions required to proceed with installation depend on the UEFI/BIOS Boot Mode you
selected for installing the OS.
If you installed the OS in Legacy BIOS Boot Mode, proceed to
■
If you installed the OS in UEFI Boot Mode, proceed to
■
26. If you installed the OS in Legacy BIOS Boot Mode, perform these steps and
proceed to
54 Oracle Server X5-2 Installation Guide for Linux Operating Systems • October 2016
Step 28.
Step 26.
Step 27.