Set Up The Remote Console - Oracle X5-2 Installation Manual

Set Up the Remote Console

a. Type your Oracle ILOM user name and password.
The default Oracle ILOM user name is root and the default password is changeme.
At the Oracle ILOM prompt, type:
b.
->
The serial management port output is automatically routed to the Linux host serial local
console.
Related Information
Oracle Integrated Lights Out Manager (ILOM) 3.2 Documentation Library at:
■
oracle.com/goto/ILOM/docs
Set Up the Remote Console
View or establish an IP address for the server SP.
1.
To log in to Oracle ILOM remotely using either the command-line interface (CLI) or the web
interface, you must know the IP address of the server's service processor (SP). For instructions,
refer to
Server X5-2 Installation
2. If you are using a web-based client connection, perform these steps; otherwise
go to the step 3.
a. In a web browser, type the IP address for the server SP.
b. Log in to the Oracle ILOM web interface.
The default Oracle ILOM user name is root and the default password is changeme.
Redirect the video output from the server to the web client by launching the
c.
Oracle ILOM Remote System Console Plus application.
3. If you are using an SSH client connection, perform these steps.
a. From a serial console, establish an SSH connection to the server SP. Type:
ssh root@hostname, where hostname can be the DNS name or the IP address for
the server SP).
12 Oracle Server X5-2 Installation Guide for Linux Operating Systems • October 2016
start /HOST/console
"Modifying the Service Processor Network Settings Using Oracle ILOM" in Oracle
Guide.
http://www.