Scanner Report; Scanner Address; Base Or Access Point Address; Scanner Modes - Honeywell Voyager XP 147 Series User Manual

response to an error. To change the number of error beeps, scan the barcode below
and then scan a digit (1-9) barcode and the Save barcode on the
Chart. Default = 1.

Scanner Report

Scan the barcode below to generate a report for the connected scanners. The
report indicates the port, work group, scanner name, and address. To assign a
name to your scanner, refer to

Scanner Address

Scan the barcode below to determine the address of the scanner you are using.

Base or Access Point Address

Scan the barcode below to determine the address of the base or Access Point you
are using.

Scanner Modes

Your scanner is capable of working in single scanner mode, multiple scanner
mode, or with Bluetooth devices other than the charge base or Access Point.
48
Number of Base Error Beeps/LED Flashes
Menu Command
Scanner Report
Scanner Address
Base Address
Programming
Syntax, page 171.
Voyager XP User Guide