Show Software Revision; Show Data Format; Test Menu; Ezconfig For Scanning Introduction - Honeywell Voyager XP 147 Series User Manual

Show Software Revision

Scan the barcode below to output the current software revision, unit serial number,
and other product information for both the scanner and the base.

Show Data Format

See "Show Data Format" on page

Test Menu

When you scan the Test Menu On code, then scan a programming code in this
manual, the scanner displays the content of a programming code. The program-
ming function will still occur, but in addition, the content of that programming
code is output to the terminal.
Note: This feature should not be used during normal scanner operation.

EZConfig for Scanning Introduction

EZConfig for Scanning provides a wide range of PC-based programming functions
that can be performed on a scanner connected to your PC. EZConfig for Scanning
allows you to download upgrades to the scanner's firmware, change programmed
parameters, and create and print programming barcodes. Using EZConfig for
Scanning, you can even save/open the programming parameters for a scanner.
This saved file can be e-mailed or, if required, you can create a single barcode that
contains all the customized programming parameters and mail or fax that barcode
to any location. Users in other locations can scan the barcode to load in the cus-
tomized programming.
168
On
Show Revision
100.
* Off
Voyager XP User Guide