Transmit Records to Host
If you are operating in Inventory Batch Mode
the following barcode to transmit all the stored data to the host system.
Batch Mode Transmit Delay
Sometimes when accumulated scans are sent to the host system, the transmission
of those scans is too fast for the application to process. To program a transmit
delay between accumulated scans, scan one of the following delays. Default = Off.
Note: In most cases, a short (250 ms (milliseconds)) delay is ideal, however, longer delays
may be programmed. Contact
* Batch Mode Transmit Delay Off
Batch Mode Transmit Delay Medium
Multiple Scanner Operation
Note: Multiple Scanner Operation Mode allows you to link up to 3 scanners to one base or
Access Point (if supported). You cannot join an 8th scanner until you unlink one of the
7 scanners or take a scanner out of range.
Voyager XP User Guide
(No Delay)
(500 ms)
Inventory Batch
Customer Support
for additional information.
Mode, you must scan
Transmit Inventory Records
Batch Mode Transmit Delay Short
(250 ms)
Batch Mode Transmit Delay Long
(1000 ms)
59