Connect With Rs485 - Honeywell Voyager XP 147 Series User Manual

Connect with RS485

A scanner or cordless base can be connected for an IBM POS terminal interface.
1. Connect the appropriate interface cable to the device, then to the computer.
2. Turn the terminal/computer power back on. The scanner beeps.
3. Verify the scanner or cordless base operation by scanning a barcode from the
For further RS485 settings, refer to RS485, page 12.
6
Corded Voyager XP 1470g
RS232 Serial Port Connection:
CCB01-010BT-V1N Base
RS485 Connection:
Sample Symbols in the back of this manual. The scanner beeps once.
Voyager XP User Guide