Chapter 1 - Getting Started; About This Manual; Unpacking Your Device; Connecting The Device - Honeywell HF680 User Manual

Hand-free area-imaging scanner

Hide thumbs Also See for HF680:

Table of Contents

Getting Started

This User's Guide provides installation and programming instructions for the HF510 corded area-imaging scanner. Product

specifications, dimensions, warranty, and customer support information are also included.

Honeywell barcode scanners are factory programmed for the most common terminal and communications settings. If you need

to change these settings, programming is accomplished by scanning the bar codes in this guide.

An asterisk (*) next to an option indicates the default setting.

After you open the shipping carton containing the product, take the following steps:

• Check for damage during shipment. Report damage immediately to the carrier who delivered the carton.

• Make sure the items in the carton match your order.

• Save the shipping container for later storage or shipping.

A scanner can be connected to the USB port of a computer.

1. Connect the appropriate interface cable to the device first, then to the computer.

HF680 USB

Connection:

2. The scanner beeps.

3. Verify the scanner operation by scanning a barcode from the

The unit defaults to a USB PC Keyboard.

Sample Symbols

in the back of this manual.

1 - 1

Table of Contents