Table of Contents
Advertisement
9――The unit continuously runs for 60min, and fresh air valve runs for 54 min.
10――The unit continuously runs for 60min, and fresh air valve always runs.
Turn off air function: During Air function, press Function button into Air function. In this
case, air mark is blinking, and then press Enter/cancel button to turn off this function. Air mark will
subsequently disappear.
There is no this function for this unit.
Air setting is shown as in fig.5.7:
Note:
In air exchange mode, press Function button or there is not any operation within 5s after the last
button operation, the system will quit from air exchange setting and current energy-saving date won't be
memorized.
5.8 Sleep Setting
Sleep on: Press Function button under on state of the unit into sleep function and then press Enter/
cancel button to turn on sleeping function.
Sleep off: During sleep on state, press Function button into sleep function and then press Enter/
cancel button to turn off this function.
Sleep setting is shown as Fig.5.8:
Fig.5.7 Air exchange device
10
Advertisement
Table of Contents
