Table of Contents
Advertisement
Note ：
1.In Auto running mode with save function on, the unit will be forcibly changed to corresponding
mode. After setting of save, sleep function will be canceled.
2. In save mode, if Function button is pressed or there is not any operation within 5s after the last
button operation, the system will quit from save function setting and current data won't be memorized.
3. After power failure and then recovery, save function setting will be memorized.
4. The lower limited value in cooling mode is 16 ℃ and the upper limited value in heating mode is
30 ℃ .
5. After save setting, if the setting temperature is out of the range in the mode, the limited value
will prevail.
5.11 E-heater setting
There is no this function for this unit
E-heater: In heating mode, E-heater is allowed to be turned on for improvement of efficiency.
If heating mode is turned on by button operation, auxiliary electric heating function will be
automatically turned on.
Press Function button in heating mode into auxiliary electric heating function, E-HEATER
blinking, and press Enter/cancel button to turn on this function. In this case, E-HEATER will be
displayed, which means E-heater is allowed to be turned on.
If auxiliary electric heating function is on, press Function button to confirm or press Enter/cancel
button to cancel. In this case, E-HEATER won't be displayed, which means E-heater is prohibited to be
turned on.
The setting of this function is shown as Fig.5.11 below:
Fig.5.10 Energy Saving Setting
*
13
Advertisement
Table of Contents
