Table of Contents
Advertisement
Note:
1.After setting dry function, turn off the unit by pressing On/Off button or remote controller,
indoor fan will run at low fan speed for 10 min. (BLOW shows).Meanwhile, if dry function is canceled
indoor fan will be turned off directly.
2.There is not BLOW function in fan or heating mode.
5.13 Quiet Function Setting
Quiet function consists of two kinds: quiet and auto quiet.
Press Function button till the unit enters quiet function setting state, Quiet or Auto Quiet mark
blinks. In this case, press▲ or ▼ button to switch between Quiet and Auto Quiet and then press Enter/
cancel button to turn on this function.
In quiet mode, press Function button till the unit enters quiet function. In this case, Quiet or Auto
Quiet icon blinks and then press Enter/cancel button to cancel this function.
There is no this function for this unit.
Quiet function setting is shown in Fig.5.13
Fig.5.12 Blow function setting
*
15
Advertisement
Table of Contents
