5 INSTRUCTION TO OPERATION
5.1 On/Off
Press On/Off button to turn on the unit.
Repress this button to turn off the unit.
Note: The state shown in Fig.5.1 indicates off state of the unit after energization. The state shown
in Fig.5.2 indicates on state of the unit after energization.
Fig.5.1 Off state of the unit
5.2 Mode Setting
Under on state of the unit, press Mode button to switch the operation modes as the following
sequence:
5.3 Temperature Setting
Press ▲ or ▼ button for increase or decrease of setting temperature under on state of the unit. If
press either of them continuously, temperature will be increased or decreased by 1
In Cooling, Dry, Fan and Heating mode, temperature setting range is
Fig.5.2 On state of the unit
6
every 0.5s.
℃
16 ~ 30 ℃ .