Blow Function Setting - Fisher FSL-850B-H-3F Installation And Operation Manual

Note:
E-heater can not be set in cooling, dry and fan mode, E-heater mark won't be displayed. The
setting is shown in Fig.5.11.
There is not E-heater for A2 and cassette unit.

5.12 Blow Function Setting

Blow function: After the unit is turned off, water in evaporator of indoor unit will be automatically
evaporated to avoid mildew.
In cooling and dry mode, press Function button till the unit enters dry function, BLOW blinking,
and then press Enter/cancel button to turn on this function.
In blow mode, press Function button till the unit enters blow function and then press Enter/cancel
button to cancel this function.
Dry function setting is shown in Fig.5.12
Fig. 5.11 Auxiliary Electric Heating Function Setting
14