Table of Contents
Advertisement
Sleep off is default after power failure and then power recovery. There is not sleep function in fan
and auto mode.
Note:
In cooling and dry mode, if the unit with sleep function has run for 1 hour, the preset temperature
will be increased by 1 ℃ and 1 ℃ in another 1 hour. After that, the unit will run at this temperature. In
heating mode, if the unit with sleep function has run for 1 hour, the preset temperature will be decreased
by 1 ℃ and 1 ℃ in another 1 hour. After that, the unit will run at this temperature.
5.9 Turbo Function Setting
Turbo function: The unit at high fun speed can realize quick cooling or heating so that room
temperature can quickly approach setting temperature.
In cooling or heating mode, press Function button till the unit enters turbo function and then press
Enter/cancel button to turn on turbo function.
During turbo function, press Function button till the unit enters turbo function and then press
Enter/cancel button to cancel turbo function.
There is no this function for this unit.
Turbo function setting is shown in Fig5.9:
Fig.5.8 Sleep setting
*
11
Advertisement
Table of Contents
