Force Cooling Function; Sleep Mode - Fisher FSArt-70HF Service Manual

7.11 Force cooling function

7.11.1 Select forced cooling function with the forced cooling button or the switch
7.11.2 The compressor is unconditionally turned on, after 30 minutes cooling operation whose fan mode is set as low, the
A/C operates at the DRY mode with a set temp. of 24℃
7.11.3 All protections of remote control cooling are available at forced cooling operation
7.11.4 Forced Auto function
Select forced auto function with the forced auto button or the switch.
In forced auto status the A/C operates at remote control mode with a set temp. of 24℃
Manual operation is controlled by touching buttons and divided into force cooling and forced auto mode. It transfer
between these two modes by pressing the buttons, the cycling order of the button press is as below graph show to you.

7.12 Sleep mode

7.12.1 The sleep function is available at cooling, heating or auto mode
7.12.2 Cooling:
The set temperature rise 1°C per hour. Two hours later, the set temperature will maintain as a constant and the fan
speed is kept at low speed.
Room temperature
1'C
1'C
1
2
28
Time